Worldwide shipping Most items in stock Custom gobo + local power adapter included
Hangzhou Jingyu Optoelec Technology Co., Ltd.
Certified Manufacturer · CE · RoHS · FCC · ISO9001

Dichroic.asia details PVD-coated multi-colour dichroic gobos rated to 450C — what it means for gobo lens buyers

lens 1 min read

A recent move in the gobo lens space changes a few assumptions buyers have carried for years. Below, the practical read — what matters for a real install, not the press release.

What's happening

dichroic.asia's dichroic gobo line is produced by PVD electron-beam evaporation (PVD-EBGE) and supports multi-colour patterns for commercial and stage lighting. The heat-resistant glass version is rated for a maximum safe temperature of 450C with sizes from 8x8mm up to 220x220mm. Such coated pattern slices remain a core component for branded colour projection.

Why it matters for buyers

For a retailer, venue or signage buyer, the practical effect is simple: the unit that reads on your wall at your ambient light, with your artwork, beats the one with the bigger number on the box. Specification order — distance, image size, ambient, then brightness — decides the result.

It also changes lead-time risk. Custom gobos and certified outdoor builds need briefing before the date is fixed; the projector is rarely the long pole, the artwork and certification are.

The technical angle

Resolution of the projected image is set by the gobo, not the projector. A crisp 10,000 dpi etched glass gobo on a modest lamp still beats a soft pattern on an expensive one. Match the artwork to the glass, not the other way round.

What to specify

Before you request a quote, lock these down:

  • Lead time on a custom gobo versus a stock pattern
  • Gobo material: glass for longevity and colour, metal for cheap short runs
  • Ingress rating if it lives outdoors or gets washed down
  • Image size you need at that distance

Common questions

Glass or metal gobo?

Glass for anything long-running or colour; metal for short, cheap runs. Glass resists the hot spot that burns coated steel within a season.

Why does my colour look washed out?

Usually a dyed-glass filter fading under heat, or too many filter layers eating output. Switch to dichroic and quote filtered lumens, not bare lamp lumens.

Related products

Need help specifying this?

Send us the throw distance, the image size you need and your artwork — we will recommend the right model and quote within 24 hours.

← GOBOFACTORY expands heat-resistant dichroic glass colour f Hilti releases PM 40-MG green-beam multiline laser, 4x vis →

Regional sites & voltage guides

Local voltage, plug and certification guides for each market — built for the country you sell or install in: